MV Cable & Oil Testing – BAUR - Aspectus Engineering Services Pte Ltd

MV Cable & Oil Testing – BAUR

BAUR is a leading specialist in the field of testing and measurement technology, particularly for medium-voltage cables and insulation oils. The company offers advanced diagnostic and testing solutions that enable precise fault detection, condition assessment, and maintenance of electrical assets. BAUR’s product portfolio includes state-of-the-art equipment for cable testing and diagnostics, such as partial discharge measurement and VLF (Very Low Frequency) testing, as well as systems for comprehensive insulation oil analysis.

Of course we offer also comprehensive calibration services for all measurement devices provided by BAUR.

Cable Testing and Diagnostics

frida

VLF testing and diagnostics unit

Cable testing and diagnostics with the BAUR frida

The portable and powerful high-voltage testing and diagnostics device is used for cable and cable sheath testing of medium-voltage cables up to 20 kV and electrical equipment. Another function is insulation testing on electrical equipment.

viola

High-voltage test and diagnostics device

Cable testing and diagnostics with the BAUR viola

The portable and powerful viola high-voltage testing and diagnostics device is used for cable and cable sheath testing of medium-voltage cables up to 35 kV and electrical equipment. Another function is insulation testing on electrical equipment.

shirla

Cable sheath testing and fault location device

Cable fault location with the BAUR shirla

shirla the fault location system is used for cable and cable sheath testing as well as for pre-location and pin-pointing of cable faults. The pre-location based on the measuring bridge principle according to Murray and Glaser that is designed especially for power cables, also enables pre-location for control and lighting cables. Zero balancing and evaluation take place automatically.

Cable Fault Location

protrac®

Pin-pointing system

Cable fault pin-pointing and tracing

shirla

Cable sheath testing and fault location device

Cable fault location with the BAUR shirla.

titron®

Mobile workspace creating knowledge on the go

The titron® automatic measurement and test system is characterised by efficient technology and intuitive operation. The new generation high-performance system is based on state-of-the-art technology and provides efficient, safe and reliable cable fault location, cable testing and cable diagnostics with its software support. It provides network operators with extensive knowledge about cable condition and gives them an edge in troubleshooting and fault prevention. Failures and unscheduled repairs can be avoided. This affords certainty in maintenance planning and creates the ideal basis for decisions on replacement investments.

IRG 400 / IRG 400 portable

Fast and precise cable fault pre-location

The IRG 400 is an efficient time domain reflectometer for cable fault pre-location that provides fast and precise measurement results.

The choice is yours, as the IRG 400 is available as a portable device in a transport case or as a 19″ plug-in unit in the Syscompact 400 and Syscompact 400 portable. This provides maximum flexibility and is the solution for a wide range of applications.

It can be operated using a tablet or laptop. Operation is extremely efficient when used in combination with the tried-and-tested BAUR Software 4 (laptop) or the new touch-based BAUR BUI-F application (tablet). The new generation of the IRG can be connected to a tablet and laptop via Wi-Fi – thus enabling you to perform galvanically isolated measurements outside of the HV area.

SSG 3000

Surge voltage generator

Cable fault location with the BAUR SSG 3000

Surge voltage generators are used for pre-location and pinpointing of high- and low-resistive as well as intermittent faults in power cables. The energy stored in a high-voltage capacitor is released at regular intervals or as DC voltage. The thus generated acoustic signal at the fault position can be recorded with a ground microphone and a universal receiver.

PHG 80 TD PD

BAUR VLF test and diagnostics system

Cable testing and diagnostics with the BAUR PHG 80 TD PD

With the PHG TD PD, you get a multifunctional cable testing and diagnostics system that was specially designed and developed for medium-voltage networks. The PHG TD PD system is also the only cable testing and diagnostics system that gives a comprehensive overview of the quality and ageing condition of the test sample. The diagnostic methods TD and PD are mutually complementary, because on one hand you can detect the complete condition and on the other hand locate individual faults in the operating resources.

Oil testing

DTA 100 C

Oil breakdown voltage tester

Insulating oil testing with the BAUR DTA 100 C

The BAUR DTA 100 C oil tester is designed for continuous operation in the laboratory and is characterized by the combination of extraordinary features. As a high-performance device with a test voltage up to 100 kV, with clear breakdown detection and absolutely reliable measurement results even across several measurement sequences, the BAUR DTA 100 C is the leading testing device for users in the electricity and other industries and in testing institutes.

DTL C

Oil tan delta and resistivity tester

Insulating oil testing with BAUR DTL C

The thorough analysis and diagnostics of insulating oils with BAUR DTL C provides valuable findings for scientific and technical work, research and development. Comprehensive knowledge on the current condition of insulating materials is also becoming increasingly important for practitioners in mains operation.
BAUR DTL C offers the most precise information currently available for efficient oil management in plants in the electricity and industry sectors.

The BAUR calibration laboratory performs calibrations as a legally independent body . As a laboratory, BAUR can provide objective and reliable results. This independence is particularly important because it gives you the certainty you need that the calibration results of your devices are precise and reliable.

By performing calibrations as a legally independent body, BAUR ensures the highest standards and can thus guarantee that the measurement results are correct. You can therefore rely on the expertise of BAUR and be certain that your instruments and devices are working precisely.

Let's Build Success Together

We believe in long-term partnerships that drive reliability, efficiency, and innovation. Whether it’s high-voltage testing, condition monitoring, or asset optimization, our experts are ready to support you with proven solutions. Contact us to discuss how we can help you achieve your goals.